Standard 3-phase

B3 Foot Mounted
B5 Flange Mounted
B14 Face Mounted

Key Features

  • 3 Phase, 50 Hz/60Hz
  • 220-240/380-415V up to 3kW
  • 380-415/660-720V 4 kW & above
  • B3 Foot, B5 Flange and B14 Face Mounting
  • 4 Pole (1500 rpm) and 6 Pole (1000rpm)
  • IEC Frame Sizes 63 up to 200

Standard 3-phase with brake

B3 Foot Mounted Braked
B5 Flange Mounted Braked
B14 Face Mounted Braked

Key Features

  • 3 Phase, 50 Hz/60Hz
  • 220-240/380-415V up to 3kW
  • 380-415/660-720V 4 kW & above
  • B3 Foot, B5 Flange and B14 Face Mounting
  • 4 Pole (1500 rpm) and 6 Pole (1000rpm)
  • IEC Frame Sizes 63 up to 200
  • High torque DC brake
  • Standard rectifier: 230V, 50/60Hz (others on request)

Useful Information

The brake units are a single disc type mounted on the non-drive end-shield of the motor and can be either DC or AC types. They are spring applied electrically released units, which provide fail to safe operating characteristics such that on interruption, or failure of power supply, the brake will engage and arrest the load.

  • High efficiency — low running costs
  • Low noise levels
  • High power factors
  • High torque with smooth acceleration and low current
  • Multii-mount versatility for mounting arrangement and terminal box position
  • Aluminium construction for light weight and. corrosion resistance
  • Four position cable entry
  • 2 and 8 Pole 3 phase AC motors
  • Single phase AC motors
  • DC motors - permanent magnet or servo
  • Cast Iron or Steel construction motors
  • High altitude and high temperature options
  • Integral AC inverter
  • Integral encoder and/or Forced ventilation
  • Enclosures IP56 up to IP68
  • Tropicalised motors
  • NEMA and Japanese standard units
  • Marine motors
  • Hazardous area motors
  • ATEX rated motors

Brochures

Electric Motors(EN)
PDF