Kegelrad-Getriebe

Serie 4000

Range-P Bevel Gearbox, 4000 Series, 2-Way, Solid Shaft

Range-P Bevel Gearbox, 4000 Series, 3-Way, Solid Shaft

Ein kleines, kompaktes "Monoblock"-Kegelradgetriebe für die Übertragung und Verteilung eines geringen Drehmoments von bis zu 44Nm.

Nur als 2-Wege- und 3-Wege-Variante mit Vollwelle erhältlich. Es gibt mehrere alternative Befestigungsmöglichkeiten über jeweils 4 Befestigungslöcher sowie über 3 Löcher in integral gegossenen, kleinen Bodenbefestigungsdomen in großen Abständen für eine stabile Befestigung oben oder unten. Das Design bietet ein optisch ansprechendes, hochwertig verarbeitetes Gehäuse, das im Druckgussverfahren aus einer leichten Aluminiumlegierung hergestellt wird.

Für eine verbesserte 4-Wege-Vollwelle, Hohlwelle, mehr Übersetzungsverhältnisse und verbesserte Montage siehe die P2000-Serie.

Useful Information

Key Features

Low Torque transmission up to 44Nm
Compact lightweight ‘monobloc’ Design
3 Bolt Hole Mounting
2-way and 3-way configurations
Solid Shaft
Gear Ratios: 1:1 & 2:1
Case-hardened and ground alloy-steel shafts
Can be mounted on end flanges
Sealed for life, maintenance free

Typical Applications

These ultra compact low torque bevel gearboxes are designed to be lightweight and offer flexible mounting options through it’s ‘monobloc’ housing. This bevel gearbox is perhaps best described as a popular multi-purpose bevel gearbox that has been specified across a very broad range of applications. The 4 bolt hole design of the 2000 series provides improved mounting stability when compared to the 3 bolt hole design of the 4000 series.

Selecting the Right Gearbox

Bevel Gears

The GLEASON spiral bevel gears, of hardened and tempered alloy steel, provide smooth, evenly distributed, load transmission, which is enhanced by, bi-directional, “running-in”, in pairs.

Shafts

Shafts are all made of alloy steel hardened, tempered and ground. All shafts are carried by generously sized, high quality, deep groove, ball bearings of established make.

Design Speed & Life

Optimum performance, at continuous full rated power transmission, is based on an input-shaft design-speed of 1400 RPM. This provides an average, trouble-free, operating design-life of 10,000 hours. However, where units are used as speed “increasers”, optimum performance, “input” design-speed is reduced to 750 RPM for the 2:1 ratios.

Operating Temperature

Operating case-temperature should be kept within the permissible limit of -18° C to +80°C (0°F to 170°F), to ensure trouble-free running.

Quiet Running

Close tolerance gear cutting and high accuracy assembly ensures extremely low operating noise levels, even at high running speeds.

Alignment Accuracy

Standard unit, final gear assembly, angular clearances are held to within 15’ – 30’ of arc.

Lubrication

All units are supplied fully charged with oil. The 4000 series is lubricated with synthetic oil. The lubrication is for life, they do not need replenishments or changes for all the lifetime of the gear.

Configurations

Solid Shaft

Hollow Shaft

Special Designs

There are no special design features available for the Range-P bevel gearboxes. For a special design bevel gearbox please view the Range-C, Range-N or Range-U. To discuss your requirements further please contact your nearest representative.