系统组件
锥齿轮箱
锥齿轮减速箱用于通过九十度传递机械动力。
可用于带有空心或实心输出轴的螺旋升降机系统。是 H、U 和 T 型顶升系统的理想主驱动装置。也可直接安装在螺旋升降机上作为主驱动。
扭矩传输最高可达 14000Nm，齿轮比最高可达 1715:1。
Useful Information
Gearbox Features
Torque Range
– 100 Nm to 14000 Nm
Power Rating
– 0.22 kW to 150 kW (at 1400 rpm input)
Gear Ratios
– 5.4:1 to 1715:1
Output
– Foot and shaft mount – two bore options size
– Keyless shrink disc fitting
– Metric or Inch series solid output shaft
– Taper bushing
– Splined Hollow shaft to DIN 5480
Input
– IEC and NEMA motor adaptors
– Servo motor adapters
– Metric or inch series solid input shaft
Gearbox Options
Main gear options
– Backstop
– Reinforced bearings for higher overhung load capacity
– Reduced backlash
– Taconite seals
AC Motors
– Integral motors and brake motors
– IEC motors and brake motors
– Single and dual speed motors
Main brake features
– DC and AC supply
– Fast brake engage/disengage through electronically controlled AC/DC rectifiers.
Main motor options
– Thermistors and thermostat sensors
– Separate supply forced ventilation
– Line driver and push-pull incremental encoder
Selecting the Right Reduction Gearbox
There are 3 factors to consider when selecting the correct reduction gearbox.
- Select a gearbox type to the closest required power (Pd)
- Find the closest matching output speed hence gear ratio for that gearbox type
- Check that the gearbox power rating is suitable for the actual output speed
Download the Reduction Gearbox selection guide for more information.
